 |
||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||
|
ROUTER MAT: Great for routing, sanding, scraping, drilling, etc., all done without clamps! The PowerGrip Router Mat’s gripping action holds work securely in place. Made of dense rubber that will not slide on wood, laminate, CorianTM, etc. PowerGrip Router Mat pads are thinner and grip better than the multicolored urethane pads. Eliminates vibration. Sanding Mat: Ideal for sanding since dust never clings - the mat has many tiny holes that allow dust to fall through -holds your work piece like a magnet, without clamps. Made of knitted polyester, coated with a special formula of PVC. Eliminates vibration.
|
||||||||||||||||||||||||
|
|||
|
|
|
|
|
Versatile 4 grit hone (120, 180, 240, 320 grit) allows quick and easy touch up on your router bits, saw blades and cutter knives. The small 6 1/4" overall length allows convenient deburring and sharpening on carbide or steel cutting surfaces. Steel handle. Diamond Bar Hone Knife #9132 Reg. $19.95..........................SALE $15.95  |
|||
|
|||
|
|
|
|
|
Hone your jointer and planer knives to razor sharpness without the hassle of disassembly and realignment. Available with either (A) Carborundum (for steel knives) or (B) diamond stones (for both carbide and steel knives). Sharpen knives right on the cutter head! The guide rides along the cutter head, holding the 180 and 400 grit stones perfectly aligned to the blade. Sharpen your blades easily, quickly, and inexpensively. (A) Carborundum #9134 Reg. $22.95........SALE $15 (B) Diamnond #9135 Reg. $45.95.......SALE $29.95 |
|||
|
|||
|
|
 |
|
|
Get your planer and joiner in top condition quickly and easily to prepare for all of your woodworking projects with this inexpensive set of essential tune-up tools.
#9384.................................................SALE $79.95 |
|||
|
||||
|
|
|
||
|
Micro adjustable to 0.001". For both steel and carbide knives. The revolutionary design of this jig allows you to save time and effort while setting up jointer or planer knives quickly and accurately. The setting jig holds the knife firmly in position, freeing both hands for adjustment and tightening of the knife. This product also provides priceless added safety by allowing hands-free tightening, keeping fingers safe from razor sharp cutter knives. Planer/Knife Setting Jig #9397................................................SALE $69.95 |
||||
|
||||||||||||||||||||
|
|
|
||||||||||||||||||
|
Easy-to-use, this tape is the perfect way to keep patterns in place before cutting. Apply tape, remove backing, position then apply with light pressure. Available in 2 diferent sizes.
|
||||||||||||||||||||
|
|||
|
|
|
|
|
Larger 1 oz. size. MLCS Bearing Lube adds about 200% more life to your bearings. It comes in a handy, no-mess squeeze bottle with a needle-point applicator, allowing the lubricant to penetrate the dust shield on the ball bearing. Put one drop directly on bearing after job and bit is ready for next use. #9029...........................................$4.95 each |
|||
