Kitchen Door & Drawer 5 Piece Sets |
|
 Set-Up Blocks For Katana® Door & Drawer Router Bits The pre-cut joint profile allows quick, proper height adjustments with accurate setup everytime. Won't distort or swell. For 3/4" stock. Instructions included. Katana Set-Up blocks....$9.95
|
||||||||||||||||||||||||||||||||||||||||||
NEW! Mix & Match Katana Router Bit Sets! Choose the Rail & Stile and the Raised Panel Profile you want! NEW Mix & Match option allows you to create a custom 1/2" shank set with carbide tipped Katana® router bits. Make raised panel doors, table tops, and drawers for fine furniture and custom kitchen cabinetry. 1. The Raised Panel router bit puts a classic edge on the floating central panel in your door. Choose Ogee, Cove or 18˚ Bevel. 2. Our Matched Rail and Stile router bit sets create precisely mated rails and stiles that form the frame of your door. Use with 3/4" to 7/8" stock. Choose Ogee or Round Over. 3. When the central panel needs to be wider than your stock, use the Reverse Glue Joint router bit to mill two or more pieces of stock with reverse cut edge joints to reach the required width. Assemble and glue up the stock, and your panel is ready to be raised. Use with stock up to 1-1/4" thick. 4. Drawer construction is easy with the Katana® Drawer Lock router bit. Create a strong, long lasting joint that fits precisely because one bit makes the cut in the drawer front, as well as the side of the drawer, so both pieces fit together perfectly. More information on individual bits: Matched Rail and Stile Bits, Raised Panel bits, Drawer Lock, Reverse Glue Joint bits.  Rail & Stile Router Bit Instructions (PDF)
|
||||||||||||||||||||||||||||||||||||||||||||
| |||||